Photofermentative hydrogen production from molasses: Scale-up and outdoor operation at low carbon-to-nitrogen ratio

Photofermentative hydrogen production was carried out under outdoor conditions with a Rhodobacter capsulatus strain on molasses, a renewable and sustainable feedstock. An existing photobioreactor design was scaled-up from 9 L to 20 L. The decreased carbon-to-nitrogen (C/N) ratio of 13.0, compared to our previous work, accelerated growth and resulted in a reduced lag period for hydrogen production as well as higher productivities in the exponential phase. However, the low C/N ratio also promoted a high optical density due to growth, limiting light transmission. Still, the maximum productivity was found as 0.47 mol H₂/(m³·h), significantly higher than our result with the smaller reactor volume. High rates of production could not be maintained presumably due to the combined effects of cloudy periods, the aforementioned C/N ratio and decreasing pH. These results suggest that the scale-up was successful and there is potential for further improvement using optimal C/N ratio and cell concentration values.     

Analysis of the risk-sharing ratio in PPP projects based on government minimum revenue guarantees

Public-private partnership (PPP) projects have been widely applied in infrastructure construction. A suitable risk distribution strategy is crucial for promoting negotiations between the government and investors. The government usually provides guarantees to investors to distribute risk. However, an excessive guarantee increases the government's financial burden, whereas an insufficient guarantee reduces the confidence of the investors participating in the project. In a minimum revenue guarantee (MRG), the government subsidizes the investors the difference between the actual revenue and the government guarantee line if there is a loss. In PPP power plant and highway projects, investors' revenues come from two sources: government guarantees and the project company's self-sale. To support project companies and to optimize the projects' benefits, the government should set a reasonable benchmark for purchase amounts. Based on the traditional principal-agent model, this paper introduces the reciprocal preference theory to analyze the risk-sharing ratio most suitable for the government. Then, an optimal incentive mechanism is established to guarantee the project's income. The results indicate that by setting a different guarantee strategy for different participants, the government can utilize reciprocal preference to incentivize investors to exert more effort during a partnership and avoid moral hazard.     

基于旋滚比的电主轴轴承预紧力优化研究

为研究不同工况下轴承预紧力对电主轴轴承动力学的影响规律，基于外轨道控制理论,建立了一种以旋滚比可优化的轴承预紧力动力学模型。通过分析高速状态下滚动体载荷和特征参数动态变化过程，构建综合考虑滚动体滚动、自旋转、陀螺运动和离心力的轴承动力学分析模型，在此基础上，计算旋滚比动态变化结果；研究Jones发现的阈值与旋滚比之间的动态定量映射关系；以轴承滚动体打滑状态为优化目标，使用MATLAB仿真分析不同工况下轴承最佳预紧力。建模分析表明，轴承旋滚比大小可以反映轴承预紧效果，也可实现轴承预紧力动态定量优化。     

一种相位测试用曲口面天线的设计与应用

相位测试技术可满足不同外形天线罩的在线测试需求。通过数值仿真,设计最佳变换曲线完成矩形 传输波导与圆形辐射天线的拟合连接,能够有效降低天线驻波比,实现测试探头的高增益收发,提升测试有效性。 在维持驻波比参数前提下,对天线口面弧线给予二次曲率调整,可以适应不同外形天线罩的测试稳定性要求。根据 仿真结果加工的低驻波比反射相位测试天线,已应用于多个型号天线罩成型中的相位在线测试,提高了监控的有效 性,验证了设计仿真结果的正确性。     

Effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter using CFD

The effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter has been evaluated using computational fluid dynamics (CFD). The shear stress transport k-ω (SST k-ω) turbulence model has been adopted for closure. The performance of two V-cone flowmeters with different beta ratios (β) viz., 0.6 and 0.7 for a fixed vertex angle (ϕ) of 60° has been analysed as a function of Reynolds number (Re). The results show that the coefficient of discharge (C_d) increases with Reynolds number in the laminar and transition flow regimes whereas it is nearly constant in turbulent flow regime. From the results, it can be concluded that C_d is independent of Re for values equal to 4000 and beyond. Further, it is also seen that the performance of the V-cone flowmeter is not affected by the upstream boundary layer thickness if the velocity profiles having different boundary layer thickness are extracted from an axial distance of 10D and more are fed at 5D upstream of the meter. However, the meter is sensitive to the extracted velocity profile from an axial distance of 5D and uniform velocity profile being fed at 5D upstream. The value of C_d may be sensitive as a result of the pressure variation due to the obstruction.     

机电控制无级变速器执行机构动态响应特性仿真研究

为研究夹紧力可调的机电控制无级变速器（EMCVT）电控电动执行机构的可靠性，及其速比和从动带轮夹紧力动态响应的影响因素，采用MATLAB/Simulink构建了EMCVT执行机构的动力学模型，设计了针对EMCVT电控电动执行机构的速比和夹紧力闭环控制器。对EMCVT输入转矩突变和目标速比突变两种工况进行了仿真分析，仿真结果表明：速比和从动带轮夹紧力动态响应的超调量和调节时间满足CVT的使用要求，从动带轮夹紧力响应时间小于1s，速比变化率可以达到2；EMCVT速比和从动带轮夹紧力动态响应的主要影响因素是执行电动机的负载和转动方向。     

Optimization of C/TiCx duplex diffusion barrier coatings for SiCf/Ti composites based on interfacial structure evolution exploration

Introducing a carbon single coating is a popular method used to protect SiC_f/Ti composites from severe interface reactions. However, carbon coatings lose their protective effect on SiC fibres at high temperature, even after a short period time. As such, given the strong demand for high temperature applications in aeronautics and astronautics a more coating which is more effective at high temperatures is desirable. In order to improve the high temperature interfacial stability of SiC_f/Ti composites, a C/TiC_x duplex coating system with different C contents in TiC_x was introduced to explore the protection of fibres at 1200?°C for 1?h. The results show that the C/quasi-stoichiometric TiC coating system protects the SiC fibres most effectively. Based on insights from the evolution of the interface structure, TiC_x has been identified as an interfacial reaction product from the C single coating, exhibiting a gradient in C content and grain size, which is different from a deposited TiC layer with a well-distributed composition and structure. The different coating structure gives rise to different ability to resist C diffusion at high temperatures, in which poor resistance ability appears in TiC_x interfacial reaction layer coming from C single coating due to short-circuit diffusion in C-rich fine-grained TiC layer and fast intracrystalline diffusion trigged by amounts of vacancies in sub-stoichiometric coarse-grained TiC layer. Therefore, C/quasi-stoichiometric TiC duplex coatings with a thick, coarse-grained quasi-stoichiometric TiC layer could effectively inhibit C diffusion by comparison to C single coatings, and is more effective than C/rich-carbon TiC duplex coatings due to the existence of short-circuit diffusion in the latter. As such, C/quasi-stoichiometric TiC duplex coatings appear to be an optimal diffusion barrier for SiC_f/Ti composites at high temperature.     

An energy‐dissipating approach for adjacent retrofitted structures

The approach of positioning energy dissipaters between adjacent structures can effectively prevent the collision of two adjacent buildings. For adjacent retrofitted structures, an effective strengthening approach that involves implementing energy‐dissipation measures both between and within buildings is proposed. This paper is based on the actual Shanghai ShiMao International Plaza. To avoid having to strengthen most of the structural members, the strengthening measure of energy dissipation is selected because of its construction cost and time constraints. This approach involves replacing several dampers between the adjacent structures and adding viscous damping walls in the retrofitted structure to reduce the seismic response of the retrofitted structure back to the original level. Additionally, a practical calculating method for the equivalent additional damping ratio for the adjacent structures connected by energy dissipaters is proposed. The results show that the effect of energy dissipation in the retrofitted structure is prominent and that the goal of indirect strengthening is achieved. The strengthening approach of energy dissipation and the calculating method of the equivalent additional damping ratio for adjacent structures provide a reference for similar engineering designs.     

Characteristic of rotating detonation wave in the H2/Air hollow chamber with Laval nozzle

To pinpoint the relationship between high frequency tangential instability(HFTI) and continuous rotating detonation (CRD), series of H₂/Air rotating detonations are experimentally achieved in the hollow chamber with Laval nozzle. The contraction ratio of the nozzle has a significant effect on the detonation. The detonation waves number increases with the increasing of equivalence ratio (ER) or nozzle contraction ratio. Based on its character, a new type of detonation is defined as two dominant peak one wave mode (TDPO). The velocities of detonation waves propagating in this new mode are larger than the Chapman-Jouguet (CJ) theoretic value. On the assumption that the reflection wave is rotated with the detonation wave, this mode is well illustrated. The forming process of two waves is also given. The results show that the appearance of combustion mode is relative to the reflection wave generated at the contraction section of the nozzle. The inner mechanism of the refection wave is illustrated. These works make a foundation to investigate the relationship between rotating detonation and tangential instability.